24 CFR §200.943 — Supplementary specific requirements under the HUD building product standards and certification program for the grademarking of lumber
24 CFR §200.943, Supplementary specific requirements under the HUD building product standards and certification program for the grademarking of lumber. An FHA program rule in Subpart S—Minimum Property Standards of 24 CFR Part 200 (Introduction to FHA Programs).
Verbatim regulatory text
Verbatim provisions from 24 CFR §200.943 — Supplementary specific requirements under the HUD building product standards and certification program for the grademarking of lumber — each quote is a verified substring of the regulator-published source snapshot, not retyped. Quoted for reference; this is not legal advice. The operational layer (P&P updates, prompts) lives in the regulation update kits.
24 CFR §200.943(a)
(a) Applicable standard. (1) In accordance with UM 38j, lumber shall be grademarked in compliance with the U.S. Department of Commerce Voluntary Product Standard PS 20-94 American Softwood Lumber Standard. (2) This standard has been approved by the Director of the Federal Register for incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. It is available from the U.S. Department of Commerce, NIST, Office of Voluntary Product Standards, Gaithersburg, MD 20899.
24 CFR §200.943(b)
(b) Labeling. Under the procedures set forth in § 200.935(d)(6) concerning labeling of a product, the administrator's validation mark and the manufacturer's certification of compliance with the applicable standard are required on the certification label issued by the administrator to the manufacturer. However, in the case of grademarking of lumber, the following information shall be included on the certification label or mark: (1) The registered symbol which identifies the grading agency; (2) Species or species combination; (3) Grade; (4) Identification of the applicable grading rules when not indicated by the species identification or agency symbol; (5) Mill or grader; (6) For members which are less than 5 inches in nominal thickness, indication that the lumber was green or dry at the time of dressing; (7) Indication that the lumber was finger jointed; and (8) The certification mark shall be affixed to each piece of lumber.
24 CFR §200.943(c)
(c) Periodic tests and quality assurance. Periodic tests and quality assurance inspections shall be carried out by the American Lumber Standard Committee as defined in PS 20-94.
Get this regulation in your AI window
Put the verbatim text and its effective date in front of your assistant, instead of whatever it remembers.
Add to Claude shows the one-time setup: paste one address, no account with us. Add to ChatGPT adds the free C4C app from ChatGPT’s app directory. Either way it’s free.
Get notified if this rule changes
One email when 24 CFR §200.943 — Supplementary specific requirements under the HUD building product standards and certification program for the grademarking of lumber changes: what changed, the new verbatim text, and the effective date. Nothing else.
Double opt-in: we send a confirmation link first. Following one section does not subscribe you to anything else. Privacy.
Source of record: https://claudeforcompliance.com/regs/fha-24cfr-200-943/
· register fha-24cfr-200-943 · verbatim, source-snapshotted regulator text from the
Claude for Compliance corpus. To work from every register at once, download the corpus
and follow the methodology.